top of page

Felix Welsch

Felix.jpg

Wissenschaftlicher Mitarbeiter

Ausbildung

Masterthesis

Entwicklung eines Prüfverfahrens zur Bestimmung biaxialer Werkstoffkennwerte von Kunststoffen

Bachelorthesis

Entwicklung und Konstruktion der Mechanik einer Miniatur-Spritzgießmaschine

Beruflicher Werdegang

Arbeitsgebiete

  • FGL Elastokalorik
  • FGL Modellierung

  • FGL Aktorik & Sensorik

  • FGL Experimente

  • DE Experimente

Publikationen

  • F. Welsch et al., “Numerical simulation and experimental investigation of the elastocaloric cooling effect in sputter-deposited TiNiCuCo thin films,” Contin. Mech. Thermodyn., vol. 30, no. 1, pp. 53–58, 2017.

  • S.-M. Kirsch et al., “NiTi-based elastocaloric cooling on the macroscale - from basic concepts to realization,” Energy Technol., no. 6, pp. 1567–1587, 2018.

  • N. Michaelis, F. Welsch, S.-M. Kirsch, M. Schmidt, S. Seelecke, and A. Schütze, “Experimental Parameter Identification for Elastocaloric Air Cooling,” Int. J. Refrig., 2019.

  • [S.-M. Kirsch, F. Welsch, and S. Seelecke, “Energiewandler mit thermoelastischer Anordnung sowie Energiewandlersystem,” DE102016118776A1, 2016.

  • S.-M. Kirsch, F. Welsch, and S. Seelecke, “Energiewandler mit thermoelastischer Anordnung sowie Heiz-/Kühlsystem,” EP3306082A2, 2017.

  • S.-M. Kirsch, M. Schmidt, F. Welsch, N. Michaelis, A. Schütze, and S. Seelecke, “Development of a shape memory based air conditioning system,” in 59th Ilmenau Scientific Colloquium, 2017.

  • F. Welsch et al., “Elastocaloric Cooling: System Design, Simulation, and Realization,” in Smart Materials and Structures, 2018, pp. SMASIS2018-7982.

  • N. Michaelis, F. Welsch, S.-M. Kirsch, M. Schmidt, S. Seelecke, and A. Schütze, “Investigation of Single Wire Elastocaloric Air Cooling Potential,” in Thermag VIII, 2018, no. 0027.

  • S.-M. Kirsch, F. Welsch, N. Michaelis, M. Schmidt, A. Schütze, and S. Seelecke, “Continuously Operating Elastocaloric Cooling Device based on Shape Memory Alloys: Development and Realization,” in Thermag VIII, 2018, no. 0039.

  • F. Welsch, S.-M. Kirsch, N. Michaelis, M. Schmidt, A. Schütze, and S. Seelecke, “Continuously Operating Elastocaloric Cooling Device based on Shape Memory Alloys: Modeling,” in Thermag VIII, 2018, no. 0040.

  • N. Michaelis, F. Welsch, S.-M. Kirsch, M. Schmidt, S. Seelecke, and A. Schütze, “Investigation of Single Wire Elastocaloric Air Cooling Potential - Poster,” Thermag VIII. Darmstadt, Germany, 2018.

  • S.-M. Kirsch, F. Welsch, N. Michaelis, M. Schmidt, A. Schütze, and S. Seelecke, “Continuously Operating Elastocaloric Cooling Device based on Shape Memory Alloys: Development and Realization - Poster,” Thermag VIII. Darmstadt, Germany, 2018.

  • F. Welsch, S.-M. Kirsch, N. Michaelis, M. Schmidt, A. Schütze, and S. Seelecke, “Continuously Operating Elastocaloric Cooling Device based on Shape Memory Alloys: Modeling - Poster,” Thermag VIII. Darmstadt, Germany, 2018.

  • S.-M. Kirsch and F. Welsch, “Elastocalorics: Ultra-efficient cooling systems - Invited Talk,” in VDI Workshop: Funktionale Materialien für mechatronische Systeme, 2018.

  • F. Welsch, “A fully-coupled simulation tool for elastocaloric air-cooling devices - Invited Talk,” in IUTAM Symposium: Phase Transformations in Shape Memory Materials: Modeling and Applications, 2019.

  • F. Welsch, S.-M. Kirsch, P. Motzki, M. Schmidt, and S. Seelecke, “Vacuum Gripper System Based on Bistable SMA Actuation,” in ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2018, pp. SMASIS2018-7980.

  • S.-M. Kirsch, F. Welsch, M. Schmidt, P. Motzki, and S. Seelecke, “Bistable SMA Vacuum Suction Cup,” in ACTUATOR 2018: 16th International Conference on New Actuators, 2018.

  • F. Welsch, S.-M. Kirsch, P. Motzki, M. Schmidt, and S. Seelecke, “Vacuum Gripper System Based on Bistable SMA Actuation - Poster,” ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. San Antonio, Texas, USA, pp. SMASIS2018-7980, 2018.

  • R. Britz et al., “SMA Wire Bundles - Mechanical and Electrical Concepts,” in ACTUATOR 2018: 16th International Conference on New Actuators, 2018.

  • F. Welsch, B. Fasolt, and S. Seelecke, “Dielectric breakdown test setup for dielectric elastomers: design and validation,” in SPIE 10594, Electroactive Polymer Actuators and Devices (EAPAD) XX, 2018, no. 105941A.

Eine vollständige Liste der Publikationen findet sich auf researchgate.

bottom of page